4 Tips for Cleaning Your Dishwasher.
You may have a dishwasher, but if you’re anything like me, it tends to fill up quickly. The best way to keep your dishwasher clean and tidy is by using these six easy tips.
1. Add more soap: If your dishwasher doesn’t have enough soap for the size of the load, add more soap when you open it and then close it again before starting the cycle.
2. Put in a tablet of bleach: If your dishes don’t come out clean, put a tablet of bleach in with them during the wash cycle to help get them clean again.
3. Rinse dishes before loading: Rinse off any food or grease that’s stuck on plates or bowls before loading them into the dishwasher so they don’t end up clogging your machine later on.
4. Remove all cups from the top rack: Place only cups on the bottom rack to prevent water from spilling onto the rest of your dishes and getting moldy because.
Cleaning the inside of your dishwasher
You should clean out your dishwasher at least once a month. Cleaning the inside of the dishwasher will help it function more efficiently.
To do this, remove the bottom rack and then take off the top rack if necessary. Next, remove the water inlet valve by turning it counterclockwise with a wrench. Rinse it with hot water and replace it.
Now you can spray down the inside of your dishwasher with a mixture of vinegar and water or a commercial cleaner as well as scrub any food particles or grime with a sponge or brush.
After spraying and scrubbing, wipe everything down with a damp cloth, replace your racks, and turn on your dishwasher to rinse through one cycle before drying off any excess water from the outside of the machine with a towel.
Cleaning the outside of your dishwasher
The outside of your dishwasher can get dirty from the food and grease that splashes on it as you’re loading your dishes, so wipe it down with a damp cloth to keep it looking clean.
Avoiding water spots
Water spots are one of the most annoying things about using your dishwasher. They can also make your dishes look dirty, even if they’re already clean.
If you want to avoid water spots, be sure to use rinse aid in your dishwasher. Adding rinse aid helps keep your dishes from drying out, which causes water spots.
Alternatively, you could purchase a water spot remover (like these) and apply it before loading up your machine with dishes.
Cleaning the dishes before loading
The first step to keeping your dishwasher clean is to make sure you’re loading it up with clean dishes. If you really want to get the best wash, make sure to wipe off any food or grease before loading your dishes into the dishwasher. This will ensure that they come out sparkling clean after the wash cycle has finished!
Disposing of leftover food
Don’t soak dishes: If you have leftovers, don’t soak the plates or bowls in water before loading them into the dishwasher. The food will just sit on top of the dishes and won’t be cleaned off.
Clean out your dishwasher: Every two months, remove your dishwasher from under your sink and clean it out with a solution of water and vinegar to keep it running smoothly for years to come.
Not cleaning your dishwasher can result in a build-up of bacteria, which can lead to a nasty smell. Fortunately, it’s not hard to keep your dishwasher clean. Here are some helpful tips from our staff to keep your dishwasher from smelling.